melamine-formaldehyde resin

Preparation and Wet Strengthening Properties of High Solid Content Melamine-formaldehyde Resin

高固含量三聚氰胺甲醛树脂的制备及应用研究

Improving Wet Strength of Paper by Modified Melamine-formaldehyde Resin

改性三聚氰胺甲醛树脂提高纸张湿强度的研究

Research Actuality and Application Prospect of Melamine-formaldehyde Resin and the Derivatives

三聚氰胺甲醛树脂及其衍生物的研究现状与应用前景

Influence of modifier on performance of melamine-formaldehyde resin in low pressure and short cycle

改性剂对低压短周期三聚氰胺甲醛树脂性能的影响

Preparation of phenol modified melamine-formaldehyde resin with advanced molding properties

改善模塑料性能的苯酚改性蜜胺树脂的制备

Research on Characteristics of Modified Melamine-formaldehyde Resin in Microcapsule

微胶囊壁材用三聚氰胺甲醛树脂的改性及性能研究

Investigation of the Coagulating Phenomenon of Melamine-Formaldehyde Resin Happened in the Manufacturing Process

关于三聚氰胺甲醛树脂在生产过程中发生凝固现象的机理研究与探讨

Study on the wet strength agent of cyclic urea prepolymer modified melamine-formaldehyde resin

脲醛预聚体改性三聚氰胺甲醛树脂增湿强剂的研究

The Study on the Modification of PAE with Melamine-Formaldehyde Resin

三聚氰胺甲醛树脂对白乳胶改性的研究

The melamine-formaldehyde resin modified with organosilicon was synthesized in the laboratory .

合成了有机硅改性的三聚氰胺甲醛树脂；

THE STRUCTURAL COMPOSITION AND PERFORMANCE OF MELAMINE-FORMALDEHYDE RESIN PREPARED BY ONE-STEP TECHNOLOGY One-step technology of flame retardant magnesium hydroxide

一步法密胺树脂的结构和性能一步法制备氢氧化镁阻燃剂新工艺

In this paper , melamine-formaldehyde resin was prepared by melamine and formaldehyde solution in the condition of alkaline .

本文通过三聚氰胺和甲醛溶液在碱性环境下反应制备三聚氰胺甲醛树脂。

Preparation of melamine-formaldehyde resin / montmorillonite nanocomposites

三聚氰胺-甲醛树脂／蒙脱土纳米复合材料的研制

Transparent fireproof coating for wood based on melamine-formaldehyde resin as raw materials has good decorating property and fireproof property as well .

以三聚氰胺－甲醛树脂为原料的木材透明防火涂料，具有良好的装饰性能和防火性能。

The synthesis of melamine-formaldehyde resin and its sulfonate were quoted to illustrate the mechanism of the chemical modification of melamine .

以三聚氰胺甲醛树脂、磺化三聚氰胺甲醛树脂两种重要中间体的合成为例，分析阐述了三聚氰胺改性合成机理。

Preparation of Melamine-Formaldehyde resin / Cu ~ ( 2 + ) - Montmorillonite Nanocomposites by Coordination and Intercalating

配位插层法制备三聚氰胺-甲醛树脂/Cu~（2+）-蒙脱石纳米复合材料

The three main adhesives for artificial plate are urea-formaldehyde resin adhesive , phenolic-formaldehyde resin adhesive and melamine-formaldehyde resin adhensive .

人造板工业使用的三大胶是脲醛树脂胶、酚醛树脂胶和三聚氰胺-甲醛树脂胶。

Modification of PVAc with melamine-formaldehyde resin

三聚氰胺甲醛树脂改性聚醋酸乙烯酯共聚乳液的研究

The abamectin microcapsules were prepared by in-situ polymerization process in this work , with melamine-formaldehyde resin and urea-formaldehyde resin as wall materials respectively .

采用原位聚合法，分别使用脲醛树脂和蜜胺树脂两种囊壁材料对生物农药-阿维菌素进行了微胶囊包覆。

Some thermoplastics have been used to modify melamine-formaldehyde resin solution and BPC-17 resin was selected as fiber-shaped agent finally .

采用各种热塑性树脂对树脂溶液进行改性，最终选定了BPC-17树脂作为改性成纤剂。

Microcapsulated red phosphorus ( MRP ) coated with melamine-formaldehyde resin and zinc borate was prepared and characterized by FTIR , XPS and TEM .

描述了采用密胺树脂和硼酸锌连续双层包覆微胶囊化红磷（MRP）的最新制备方法。

Phase-Change Materials Microencapsule ( microPCMcs ) was prepared by in-situ polymerization using melamine-formaldehyde resin as the shell and n-Octadecane as the core .

本论文以三聚氰胺-甲醛为壁材，正十八烷为芯材，采用原位聚合法制备相变材料微胶囊（microPCMs）。

The high-solid fast drying amino hammer paint is prepared with benzoic acid modified alkyd resin and etherified melamine-formaldehyde resin as binder , hammering agent and other components .

采用苯甲酸改性的醇酸树脂和混合醚化的三聚氰胺甲醛树脂为基料，配以适量的锤纹助剂制成高固体分低温快干型氨基锤纹漆。

After put the melamine-formaldehyde resin to modify polyvinyl acetate emulsion , the effects of copolymonomer , PVA , emulsifying agent and initiator on emulsion property were viewed .

实验结果表明，改性胶粘剂的耐水性和粘接强度较普通的聚醋酸乙烯乳液有明显提高。

Melamine mainly used for synthesis of melamine-formaldehyde resin to produce composite panels , plastic , paint , commercial filters , glues or adhesives , as well as tableware and kitchen utensils .

主要用于合成三聚氰胺甲醛树脂，以制作复合板、塑料、涂料、商用过滤器、胶水或粘合剂以及餐具和厨具。

Then melamine-formaldehyde resin was polymerized in situ with formaldehyde . The results of XRD of the composite samples indicated that the d_ ( 001 ) value changes from 1.41 nm to 1.84 nm , the interlayer distance was swelled up .

X射线粉末衍射结果显示，三聚氰胺-甲醛树脂/蒙脱土复合物试样的d（001）值由1.41nm增至1.84nm，说明蒙脱土的硅酸盐片层被撑开。

The result of XRD indicated that the layer space ( d_ (( 001 )) value ) of montmorillonite was stretched from 1.25 nm to 1.58 nm , the product was intercalated melamine-formaldehyde resin / Cu ~ ( 2 + ) - montmorillonite nanocomposites .

X-射线衍射结果表明蒙脱石的层间距由1.25nm增加到1.58nm，所得产物为三聚氰胺-甲醛树脂/Cu2+-蒙脱石插层型纳米复合材料。